all seems right, but inet hm?

[Karl_]

ok i had it over lan fine, have server on one pc and playd through another, ok anyway..
folowing http://www.liquidsilver.co.nr/ got server done
now im not sure if im doing this right to get it online though..
.cin? right unsure what ip needed:
from wesbites like http://www.tellmemygoddamnip.com its 58.xx.x.x.x.x etc
from run/cmd its ip: 10.0.x.x gateway 10.0.x.xxx
and my ip 192.168.0.1 right..ok to many numbers><
and !setup i have 192.168.0.1 as all ips ..keep that or use ^ one of those?
i screen shotted everything i thinks relevent to see as below...

my router ini's and what ever else..
noone can get onto server since changeing some ips
via LAN or INET

must be doing somthing wrong><

 

[Demonic]

Few things for you to try:

First Ping that IP from a DOS cmd - get your mates to do the same..

next with the server running, try from the command prompt:

TELNET 58.x.x.x 7000

If you get nowhere then something is blocking you. Now this can be the router of a firewall on the server IP. To go from LAN to INET only requires a few changes (as per my guide), the router part looks fine from what i can see.

 

[Karl_]

done telnet :S
conecting to 58.x.x.x ....could not open connection to the host on port 7000
0: connect failed

so um?=/

 

[mythonline]

u need to portforward, go to portforward.com and open ports 7000 7100 7200 and 80. 80 is for ur site the other for the game

 

[Karl_]

my ports are forwarded if you noticed><
still not working so=((

 

[Demonic]

Well I cannot ping you or Telnet in on your IP....so something is Stopping this somewhere. The Ping either means the router is blocking pings or your machine is switched off.

 

[Karl_]

um...
frustrating=P
my ip to router 58.x.x.x.x
router out to pcs...10.0.etcand a dif pc on rtouter is 10.0.etcwith a dif last number
forwarded to 10.0.etc rather than 192.168 wich is what i use fore another pc that conects via this one with server on it ones .0.3 the servers on .0.1 right
so if my ip to router from where ever else..is 58.x.x.x.x i need to forward ports to my server pc, that the router sends to not that my lan is on wich is 10.0.etc rather than 192.168 etc etc
yes? is that right or >.>
that being sayd if my lan is 192.168 sql and all need that and pubips (bottomline) and selgate and serverinfo(secondip after coma)all need the 10.0.etc number not 192..or 58.x.x.x
right?
and the cin..needs 10.0.0etcetc not 58.x.x.x? or ..sigh=/ lost in numbers><