[Holley] Open public server (open ports)!

zircon2k23

Loyal Member
Loyal Member
Nov 29, 2017
70
2
20
Good evening,
first of all I have to say that I can open the server in a private way putting the same IP in all the necessary sides and I can enter and create my server without problem.
But I want to take the step to open it in a public way and that people can enter already. I have looked at many topics about this and there is a configuration of the Sting that does not work and then I have also seen the guide of the liquid, where it says that it is only necessary to open 3 ports (7000, 7100 and 7200) but, it is false and it does not work for me, besides I understand that there are more ports to open and I have checked and I have tried to put these but I still can not open it.
I don't know if I need to open some more or are these and they are fine but I put the IPS in places that do not correspond (mir3server, crueldragon3g, sql, setup, listmake, etc).
Someone could help me directly telling me the public IP where it should go and the private IP where it should go.
I attach some images.

Captura.JPG


Captura2.JPG

Where I have capped the IP, which IP has to go private or public?

Captura1.JPG
These are the IPs I have listed, are there more missing? or are there too many?

Thanks
Post automatically merged:

I keep looking at people's issues and I keep seeing the only 3 ports the 7000, 7100 and 7200 and (3000)m but in the other files where there is IPS which one do I put?
 

Attachments

  • Captura2.JPG
    Captura2.JPG
    14.9 KB · Views: 4
Last edited:

zircon2k23

Loyal Member
Loyal Member
Nov 29, 2017
70
2
20
Thank you very much, as soon as I try it I will get back to you ok?
What I see at first is that you also comment very few ports the 3 (7000, 7100 and 7200) and there are people who say that opens it with more.
Post automatically merged:

Porting Guide (Mir 2 but should be close enough to Mir3)
Can someone please explain to me how to open the server online?
I see here in the forum that there are only 3 ports (7000, 7100 and 7200) but I don't know how to configure it with the other files of the mir.
And then on the other hand, I know people who have some mir open there, they have it with more than 10 ports open and it works for them.
Thanks
 
Last edited:
  • Like
Reactions: Jev
Upvote 0

Relentless

LOMCN Veteran
Veteran
Mar 9, 2012
491
34
55
Hull-England
from what i remember you only need certain ones open for it to work, but its easier to have all 10 ports open.

as soon as you open them up on your router, open regserver and go on a openport website to check if its open or not, this will show you if its worked or not.

Regards, Ben.
 
  • Like
Reactions: zircon2k23
Upvote 0

zircon2k23

Loyal Member
Loyal Member
Nov 29, 2017
70
2
20
from what i remember you only need certain ones open for it to work, but its easier to have all 10 ports open.

as soon as you open them up on your router, open regserver and go on a openport website to check if its open or not, this will show you if its worked or not.

Regards, Ben.
Good, first thank you very much for answering, but I do not understand how I have to do it, are 10 ports exactly? I think I get more than 10. And then how do I check if I have done well the configuration without needing anyone to enter from another IP.
Good, first thank you very much for answering, but I do not understand how I have to do it, are 10 ports exactly? I think I get more than 10. And then how do I check if I have done well the configuration without needing anyone to enter from another IP.
But also if it is possible if someone explains which IP I have to put in the port opening, the public one? and then in the mir files, in which files and which places of these, and SQL I have to put the IP and which one if private or public?
 
Last edited:
Upvote 0

idaBigA

Holley Mir 3!!
VIP
Oct 28, 2003
1,966
110
310
Stoke, UK
These are the IP's and Ports that Sting uses, and this works for an online server.

SQL

TBL_PUBIPS
127.0.0.1 localhost MIR3

TBL_SELECTGATEIPS
Sting 91.84.20.13 7100 MIR3

mud3\mir3server\HolleyDBSvr\HolleyDBSvr.exe
IP Set in here - 127.0.0.1

mud3\mir3server\HolleyDBSvr\!serverinfo.txt
127.0.0.1,91.84.20.13:7200

Mud3\mir3server\GameGate\SelGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5100
GateAddr=127.0.0.1
GatePort=7100

C:\Mud3\mir3server\GameGate\RunGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5010
GateAddr=0.0.0.0
GatePort=7200

C:\Mud3\mir3server\?????\RegServer.exe
LocalIP=192.168.0.25
RegPort=7010
SQLIP=127.0.0.1
Username=**********
Password=**********
MapName=0
Map_X=160
Map_Y=230
LoginPort=7000
LoginSrvPort=5500
LoginSrvIP=127.0.0.1

C:\Mud3\Setup\!runaddr.txt
127.0.0.1

C:\Mud3\Setup\!servertable.txt
0 127.0.0.1 7200

C:\Mud3\Setup\!Setup.txt
Game IP - 127.0.0.1
Hero IP - 127.0.0.1
DBAddress - 127.0.0.1
MsgAddress - 127.0.0.1
IDSAddress - 127.0.0.1
LogAddress - 127.0.0.1

Port Forwarding

7000 (Login)
7010 (Reg Server)
7100 (Sel Char)
7200 (Game)
3000 (User Count)
 
Upvote 0

zircon2k23

Loyal Member
Loyal Member
Nov 29, 2017
70
2
20
These are the IP's and Ports that Sting uses, and this works for an online server.

SQL

TBL_PUBIPS
127.0.0.1 localhost MIR3

TBL_SELECTGATEIPS
Sting 91.84.20.13 7100 MIR3

mud3\mir3server\HolleyDBSvr\HolleyDBSvr.exe
IP Set in here - 127.0.0.1

mud3\mir3server\HolleyDBSvr\!serverinfo.txt
127.0.0.1,91.84.20.13:7200

Mud3\mir3server\GameGate\SelGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5100
GateAddr=127.0.0.1
GatePort=7100

C:\Mud3\mir3server\GameGate\RunGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5010
GateAddr=0.0.0.0
GatePort=7200

C:\Mud3\mir3server\?????\RegServer.exe
LocalIP=192.168.0.25
RegPort=7010
SQLIP=127.0.0.1
Username=**********
Password=**********
MapName=0
Map_X=160
Map_Y=230
LoginPort=7000
LoginSrvPort=5500
LoginSrvIP=127.0.0.1

C:\Mud3\Setup\!runaddr.txt
127.0.0.1

C:\Mud3\Setup\!servertable.txt
0 127.0.0.1 7200

C:\Mud3\Setup\!Setup.txt
Game IP - 127.0.0.1
Hero IP - 127.0.0.1
DBAddress - 127.0.0.1
MsgAddress - 127.0.0.1
IDSAddress - 127.0.0.1
LogAddress - 127.0.0.1

Port Forwarding

7000 (Login)
7010 (Reg Server)
7100 (Sel Char)
7200 (Game)
3000 (User Count)
Good morning, I have tried this and it still does not work for me, could we if you want to make a teamviewer and try it yourself if you can and you are so kind?
Because there are acquaintances who have opened a mir but with more than 10 ports not only with those 4!
Thanks
 
Upvote 0

idaBigA

Holley Mir 3!!
VIP
Oct 28, 2003
1,966
110
310
Stoke, UK
For Holley, you only need those 4 open, 5 if you want to allow usercount. Sorry, but I don't give any personal support any more.

There may be issues with your router, I had a BT-Hub6 at my previous house and it simply would not work no matter what I tried. Everything looked fine but it would not connect from outside. I swapped back to the BT-Hub5 and it worked perfectly again.
 
Upvote 0

yk8278

Dedicated Member
Dedicated Member
Jun 21, 2009
40
4
35
[2022年3月11日 13:56:37]: System.Net.Sockets.SocketException (0x80004005): 在其上下文中,该请求的地址无效。
在 System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
在 System.Net.Sockets.Socket.Bind(EndPoint localEP)
在 System.Net.Sockets.TcpListener.Start(Int32 backlog)
在 Server.Envir.SEnvir.StartNetwork(Boolean log)
[2022年3月11日 13:56:37]: System.Net.HttpListenerException (0x80004005): 另一个程序正在使用此文件,进程无法访问。
在 System.Net.HttpListener.AddAllPrefixes()
在 System.Net.HttpListener.Start()
在 Server.Envir.SEnvir.StartWebServer(Boolean log)
[2022年3月11日 13:56:37]: Loading Time: 6 秒
[2022年3月11日 13:56:37]: Web Server Stopped.
[2022年3月11日 13:56:39]: Network Stopped.
 
Upvote 0

Martyn

Smir.co.uk
Staff member
Administrator
Mar 24, 2003
3,792
2
838
400
Kent - UK
[2022年3月11日 13:56:37]: System.Net.Sockets.SocketException (0x80004005): 在其上下文中,该请求的地址无效。
在 System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
在 System.Net.Sockets.Socket.Bind(EndPoint localEP)
在 System.Net.Sockets.TcpListener.Start(Int32 backlog)
在 Server.Envir.SEnvir.StartNetwork(Boolean log)
[2022年3月11日 13:56:37]: System.Net.HttpListenerException (0x80004005): 另一个程序正在使用此文件,进程无法访问。
在 System.Net.HttpListener.AddAllPrefixes()
在 System.Net.HttpListener.Start()
在 Server.Envir.SEnvir.StartWebServer(Boolean log)
[2022年3月11日 13:56:37]: Loading Time: 6 秒
[2022年3月11日 13:56:37]: Web Server Stopped.
[2022年3月11日 13:56:39]: Network Stopped.
you need to do it on your modem and local firewall
 
Upvote 0