[DM2] Problem, I can't connect...

[ThunderBolt]

Problem, I can't connect...

I did all the instruction guide from here but it seems not working properly.

the screenshot shows that the exe's run perfectly?

I used the guide from here: http://forum.ragezone.com/f62/2-3-server-set-up-guide-231197/

to anyone who can help me please contact me thru MSN: [email protected] or YM: [email protected]

 

[wazz]

Re: Problem, I can't connect...

It's not working because it's stopping at MapQuest.txt. You can find the mapquest file in \Mirserver\M2Server\Envir\.

Then you need to remove the bottom line. (Line 14 should be the bottom line)

If you looked just 2 threads down (at the time of me posting this) - You'd see a thread with the mapquest.txt error. (http://www.lomcn.co.uk/forum/showthread.php?t=50243)

 

[ThunderBolt]

Re: Problem, I can't connect...

still have the same problem...

 

[wazz]

Re: Problem, I can't connect...

whats it say? line 13 now or something? just remove all of the ghoul lines (bottom 3 I think), then try again.

 

[jasper]

Re: Problem, I can't connect...

it prbably mentions a ghoul on map d4221 i think,, thats the line giving the error, there is no map d4221

 

[ThunderBolt]

Re: Problem, I can't connect...

i removed the line with "d4221" from mapquest.txt and it says this

Loaded client version information and server table...
Loading StdItem.DB...
StdItem.DB loaded(737).
Loading MapFiles...
Mapfile loaded(401).
DecoItem loaded..
Loading Guild Territorys...
Loading Monster.DB...
Monster.DB loaded(356).
Loading Magic.DB...
Magic.DB loaded(54).
Loading MonGen.txt...
MonGen.txt loaded(3608).
Loading GenMsg.txt...
GenMsg.txt loaded(6).
Loading UnbindList.txt...
UnbindList information loaded.
Loading MapQuest.txt...
MapQuest information loaded.
Loading QuestDiary\*.txt...
QuestDiary information loaded.
!Abuse.txt loaded..
Loading LineNotice...
Line Notice loaded...
Admin List loaded..
Guild List loaded..
PumpkinLists loaded..
Castle List loaded..
Castle initialized..
IDSoc Initialized..
GrobalEnvir loaded..
MakeStoneMines...
Merchant loaded...
GuardList loaded..
Npc loaded..
MakeItem loaded..
StartPoints loaded...
F-Engine resumed..
U-Engine initialized..
[4/26/2007 11:39:36 PM] Guilds: 1
[4/26/2007 11:39:36 PM] Total Castles: 1
[4/26/2007 11:39:38 PM] Script file not found: .\Envir\Market_Def\1AME-GA2.txt
[4/26/2007 11:39:38 PM] Script file not found: .\Envir\Market_Def\1AME-GA2.txt
[4/26/2007 11:39:38 PM] Script file not found: .\Envir\Market_Def\1AME-GA2.txt
[4/26/2007 11:39:38 PM] Script file not found: .\Envir\Market_Def\1BME-GA1.txt
[4/26/2007 11:39:38 PM] Script file not found: .\Envir\Market_Def\1BME-GA1.txt
[4/26/2007 11:39:38 PM] Script file not found: .\Envir\Market_Def\1BME-GA1.txt
[4/26/2007 11:40:29 PM] -- SQL KeepAlive

 

[Smeagol]

Re: Problem, I can't connect...

I think those 2 scripts are in the update patch, otherwise just delete them?

 

[wazz]

Re: Problem, I can't connect...

I've attached em anyway.

 

[ThunderBolt]

Re: Problem, I can't connect...

I've attached em anyway.

tnx a lot mate... but i have another problem now, the server running now and it seems okay, no errors found as of now except the client... i used the full client from www.legendofmir.net then copy and paste the exe found from server file, it says i need to paste the mir2.exe i found from server file i downloaded... and change the IP's into 127.0.0.1, but when i run the mir2.exe it says "Connection Closed"

Well i made up my mind to change the IP's into my PC IP which is 192.168.1.5

 

[ThunderBolt]

Re: Problem, I can't connect...

Server ok now no more problem...

1 last problem i have is... I need the right Client or EXE's to run the game, i used PH EXE's not working, i used Euro EXE's not working, I used Foundation EXE's it works but there are some problem when i logon in game, i can't see the items which is probably in bag or i can't wear them... it looks like Cherry? hahaha... anyway anyone can send me the client for this server 2.3?

 

[wazz]

Re: Problem, I can't connect...

stick that exe in ur client and m2server folder.

attachments now removed

 

[ThunderBolt]

Re: Problem, I can't connect...

stick that exe in ur client and m2server folder.

didn't get what you mean... anyway i put this exe into my client folder but it seems not working too

 

[jamiedotco]

Re: Problem, I can't connect...

you need to have the exe that matches your m2 sever. Using your euro exe wont wont with the m2server you are using.

 

[ThunderBolt]

Re: Problem, I can't connect...

you need to have the exe that matches your m2 sever. Using your euro exe wont wont with the m2server you are using.

it doesn't fit mate

 

[koni]

Re: Problem, I can't connect...

lol confusing thread tbh


in the deaths update there is a file called "mir2" that is the exe you need to use to connect to your server, copy that "mir2" exe and put it in the m2server folder, over write any old one thats in there, then put that exe in your client folder.

as for clients, download the full euro 2.3 client, run the auto patcher, when its fully patched, put the client form the deaths files (mir2) exe into the client that you have just auto patched, change all the ip's in the ini files, change the server name to your own one and away you go

 

[ThunderBolt]

Re: Problem, I can't connect...

lol confusing thread tbh


in the deaths update there is a file called "mir2" that is the exe you need to use to connect to your server, copy that "mir2" exe and put it in the m2server folder, over write any old one thats in there, then put that exe in your client folder.

as for clients, download the full euro 2.3 client, run the auto patcher, when its fully patched, put the client form the deaths files (mir2) exe into the client that you have just auto patched, change all the ip's in the ini files, change the server name to your own one and away you go

Ok here what i've done...

I did what you said here, I saw "C:\MirServer\Mir2" folder from "C:\MirServer" folder and it has 2 files inside which is "mir2.exe" and "Data" folder, i copied "mir2.exe" into "C:\MirServer\M2Server" to replace the old "mir2.exe", and then I downloaded Euro Client which is 2.3 and installed, I let Euro patch till it finish, I copied "mir2.exe" again from "C:\MirServer\Mir2" and pasted it in "C:\Program Files\WEMADE Entertainment\Legend of Mir", I changed all the IP's to 127.0.0.1 from INI file... I run my server and it seems okay no error found... I used "mir2.exe" from "C:\Program Files\WEMADE Entertainment\Legend of Mir" to run the game and logon... but before the login tab appear it says "Connection Closed", I checked all the IP's from Server File and it seems Okay all IP's set to 127.0.0.1 ...

This is what i've done and still i can't connect to my server

 

[Fire]

make sure you are using the correct mir2.ini file

 

[ThunderBolt]

make sure you are using the correct mir2.ini file

tbh i dont know if im using mir2.ini file... do you know which 1 can fit to my 2.3 mir2.exe?

 

[Fire]

mir2.ini must be used in the correct format to use TD's mir2.exe

 

[ThunderBolt]

closed this thread im done fixing this shyts anyway... tnx to someone who pmed how to fix this.. :P