Doors wont open for ppl hu are connecting to server

[Thatguy]

any1 know how to fix it?

 

[Viola A.I.]

Make sure the server name is correct in the .ini files. Remember that its case sensitive. Report back.

Good luck.

 

[Thatguy]

they are all rite im thinkin it may be sumfin to do with the router but unsure

 

[iamdeath]

in a lan use the ip of the server computer as the ip put it all files and in the ini for the client us that ip (you cant not play on the server computer this way)

 

[iamdeath]

any1 know how to fix it?

U need to set-up a DMZ in your router, you do this by going into the router- type 192.168.1.1 in Internet explorer adress bar. Not sure where DMZ option located (depends on make of router) and set the DMZ to 192.168.1.50

Go to network connections on your computer, open it, select TCP/IP and click properties, from here you need to setup an static IP address, this is done by clicking th "Specify and IP" check button

Put in 192.168.1.50 as the static IP subnet mask will fill itself in. Then u need to go into your router again (see step one) and find all the DNS server info, this also needs to be entered. You do this by clicking the "advanced" button at the bottom of the IP information window where you just specifyed the IP. Click the DNS tab at the top and enter ALL the DNS Information.

The next thing to do is to start the server up, using the server launcher programs enter 192.168.1.50 as the IP (this puts the correct IP in all files) and leave the 4 u need to change ready for editing.

Now you need to change these four files

In DBsrv200
Addrtable!
192.168.1.50 xx.xx.xx.xx <---- your NET IP

Serverinfo!
192.168.1.50 xx.xx.xx.xx 7200 (replace xxx with net IP)

Next go into Logsrv
Addrtable!;Server Title Remote Public Gates...
servername Line1-7 192.168.1.50 192.168.1.50 xx.xx.xx.xx:7100 (replace xxx with net IP)


ServerAddr!
xx.xx.xx.xx <--- Net IP
192.168.1.50
192.168.1.50
192.168.1.50

 

[iamdeath]

the 3 files for server name change are setup / dbsrv / !addrtable in logsrv
and like this redserver not red server

 

[Thatguy]

i cant put a static ip in cos as soon as i do that it wont let me connect to the internet

 

[iamdeath]

i cant put a static ip in cos as soon as i do that it wont let me connect to the internet

thats becoz your not doin is bit right
Put in 192.168.1.50 as the static IP subnet mask will fill itself in. Then u need to go into your router again (see step one) and find all the DNS server info, this also needs to be entered. You do this by clicking the "advanced" button at the bottom of the IP information window where you just specifyed the IP. Click the DNS tab at the top and enter ALL the DNS Information.

ip 192.168.1.50
sub 255.255.2555.0
default gateway 192.168.1.1 or the ip of the router make so if yours is 192.168.0.2 then it that one