(EBay) Buying router help.

[~HeavenSent~]

Hi all im looking for a new router & im skint atm so i thort id try ebay see if there are any going cheap but im just confused lol

I need it to host my server pc thats running a lom server 2.3 & to run my main pc from im not with BT so BT routers are out of the pitcher but i need it to have 2+ Ethernet ports ADSL (1 or 2 i duno im on 22mb) port fwording for the server ports & i think thats it im not reall fussy about wi-fi.

In a nut shell..

I need a router to run my pc off & my server pc the router must be able to allow the ports that mir need's to run.

Some links...

http://computers.search.ebay.co.uk/...romZR11QQlopgZ3QQsacatZ44997QQssPageNameZWLRS

http://computers.search.ebay.co.uk/...romZR11QQlopgZ3QQsacatZ44997QQssPageNameZWLRS


Dam this speedtouch router wont let me run mir throw

 

[GhettoFx]

I maybe Able to help you out

 

[hesmondo]

Dam this speedtouch router wont let me run mir throw

IT probably will - just forward the ports

 

[~HeavenSent~]

Is it just the ports i need to forward?

Is this what i need to do?????



Game & Application Sharing

Overview The Overview page summarizes the applications or games installed on a particular
local host on your network, for which the SpeedTouch™ should accept inbound
initiated connections coming from the Internet.

Configure On the Configure page, you can:
�� Select Use UPnP to enable UPnP on the SpeedTouch™.
UPnP provides NAT-Traversal: UPnP aware applications on a PC will
automatically create Hyper-NAT entries on the SpeedTouch™ for incoming
traffic on the protocol ports this type of traffic needs. As a consequence these
applications are able to traverse the SpeedTouch™ without the need for extra
and manual configuration.
�� For security reasons you are able to configure the UPnP policy towards
Windows XP and UPnP aware applications and Operating Systems.
In case you select the Use Extended Security check box, only limited UPnP
operation between a host running MS Windows XP and the SpeedTouch™ is
allowed: A local host is:
�� NOT allowed to connect/disconnect the SpeedTouch™ Internet Gateway
Device (IGD) connection.
�� Allowed to add/delete Hyper-NAT entries only for its own IP address, not
for other local hosts.
If you clear the Use Extended Security check box, all UPnP- and IGD-based
communication between any local host and the SpeedTouch™ is allowed.