i runing an dm2 server useing td files when i run the server useing my cable in to the router every think load but when i trying runing it wireless the m2server does not load up and the same with the other gates
hi help please
- Thread starter grahamb
- Start date
- Jan 20, 2006
- 267
- 2
- 45
LAN networking with wireless:
e.g.
Wireless LAN IP: 192.168.1.2
Wired LAN IP:192.168.1.3
This is an example of what its doing, even on the same computer the IPs will be differant because Wireless and Wired are 2 differant connections and when either is connected the router will register them as seperate connections.
Conclusion to this is stick to one type of connection.
(posted so ppl will have a slight understanding of the problem if in the future they search and find this page)
e.g.
Wireless LAN IP: 192.168.1.2
Wired LAN IP:192.168.1.3
This is an example of what its doing, even on the same computer the IPs will be differant because Wireless and Wired are 2 differant connections and when either is connected the router will register them as seperate connections.
Conclusion to this is stick to one type of connection.
(posted so ppl will have a slight understanding of the problem if in the future they search and find this page)
Upvote
0