plz will some 1 tell me wot hex means and gimme a guilde thru hexin ???? plzzzzzzzzz
Last edited by a moderator:
how do i hex ??
- Thread starter lanky1
- Start date
first things:
go to www.download.com
search Hex WorkShop, if u done this to steps perfectly the first download found should be hex workshop 4.23 pop, click it and wait for the download to appear and download it.
After that install it. (catch the attach file and crack the hex workshop by opening it and going to help > about hex workshop, insert key)
After that goto http://www.lomcn.co.uk/forum/showthread.php?t=10497
where u will find another file i attached with a guide which will show u somethings which can be changed into the m2server.exe
P.S: i had already uploaded the cracks once if u want them press Here
go to www.download.com
search Hex WorkShop, if u done this to steps perfectly the first download found should be hex workshop 4.23 pop, click it and wait for the download to appear and download it.
After that install it. (catch the attach file and crack the hex workshop by opening it and going to help > about hex workshop, insert key)
After that goto http://www.lomcn.co.uk/forum/showthread.php?t=10497
where u will find another file i attached with a guide which will show u somethings which can be changed into the m2server.exe
P.S: i had already uploaded the cracks once if u want them press Here
lolz ta 4 ur help m8 but wiv that hex work shop aint aint a fekin clue were 2 start neva knew hexin is this hard if u could elp me ne more it will b appritiated
Well, ok. ill make you 3 examples of hexs here so that u can understand it a bit.
As i said before anyways most of the hexs available are inside an attached file i posted which u should have downloaded, if not take it here
1° Example:
Simple hex which allows the Taoist to summon two or more followers:
- Open your Hex WorkShop
- Press File -> Open: your m2server located into the mir200 folder of ur server files.
- Press CTRL+F to find an hex, check if the window that opened as the "Type" setted to "Hex Values"
- In the "Value" box copy and paste this: 006A0168002F (without spaces)
- Now press ok, it will show you where the hex is, change the "01" of the highlighted hex to 02 if u wish 2 bonefamiliar followers or 03 for 3 and so on.
- After changing the number press CTRL+F and put in the "Value" Box the following number: 246A0168002F (without spaces, and press ok)
- Now change again the "01" in the highlighted hex to the number of shinsu you wish your taoist to have
- Now do File -> Save, and press yes to the window asking to make a backup. the backup allows u to easily use the m2server not edited in case u made errors during an hex edit. The untouched m2server will be called m2server.bak and the hexed one will be m2server.exe, if the hexed one gives errors delete it and rename the .bak one to m2server.exe
2° Example.
This is an example of how to hex the korean writing which appears when u press the sound button for setting on and off the sound. The korean writting appears only if your mir.exe hasnt already been corrected. Anyway to fix this u have to do the following:
- Open Hex WorkShop
- Do File -> Open: your mir.exe located inside the Legend of Mir folder:
- After u see appear alot of strange letters and numbers Press CTRL+H
- Set the window which opened to [type= hex values]
- Copy the following hexs in the relative boxes (make attention not to copy any spaces):
Find: 5BC0BDC7E220C8BFB0FA20C4D45D
Replace: 5B536F756E64204973204F6E5D00
- Press Ok and then press Replace on the small bar which appears
- Then repress CTRL+H, and insert again this info in thier boxes
Find: 5BC0BDC7E220C8BFB0FA20B2FB5D
Replace: 5B536F756E64204973204F66665D
- RePress Ok and then press Replace on the small bar which appears
- After this, do File -> Save and press Yes at the windows which asks to make a backup.
3° Example:
this allows to change the max level limit, which is 50 to the highest one which is 255.
- Open the Hex WorkShop, then do file open m2server.exe
- Press CTRL+F and search for 807834077628
- Change the hex to 807834FE7628 by overwritting the highlighted part.
- Save the new m2server and always remember to make a backup.
As i said before anyways most of the hexs available are inside an attached file i posted which u should have downloaded, if not take it here
1° Example:
Simple hex which allows the Taoist to summon two or more followers:
- Open your Hex WorkShop
- Press File -> Open: your m2server located into the mir200 folder of ur server files.
- Press CTRL+F to find an hex, check if the window that opened as the "Type" setted to "Hex Values"
- In the "Value" box copy and paste this: 006A0168002F (without spaces)
- Now press ok, it will show you where the hex is, change the "01" of the highlighted hex to 02 if u wish 2 bonefamiliar followers or 03 for 3 and so on.
- After changing the number press CTRL+F and put in the "Value" Box the following number: 246A0168002F (without spaces, and press ok)
- Now change again the "01" in the highlighted hex to the number of shinsu you wish your taoist to have
- Now do File -> Save, and press yes to the window asking to make a backup. the backup allows u to easily use the m2server not edited in case u made errors during an hex edit. The untouched m2server will be called m2server.bak and the hexed one will be m2server.exe, if the hexed one gives errors delete it and rename the .bak one to m2server.exe
2° Example.
This is an example of how to hex the korean writing which appears when u press the sound button for setting on and off the sound. The korean writting appears only if your mir.exe hasnt already been corrected. Anyway to fix this u have to do the following:
- Open Hex WorkShop
- Do File -> Open: your mir.exe located inside the Legend of Mir folder:
- After u see appear alot of strange letters and numbers Press CTRL+H
- Set the window which opened to [type= hex values]
- Copy the following hexs in the relative boxes (make attention not to copy any spaces):
Find: 5BC0BDC7E220C8BFB0FA20C4D45D
Replace: 5B536F756E64204973204F6E5D00
- Press Ok and then press Replace on the small bar which appears
- Then repress CTRL+H, and insert again this info in thier boxes
Find: 5BC0BDC7E220C8BFB0FA20B2FB5D
Replace: 5B536F756E64204973204F66665D
- RePress Ok and then press Replace on the small bar which appears
- After this, do File -> Save and press Yes at the windows which asks to make a backup.
3° Example:
this allows to change the max level limit, which is 50 to the highest one which is 255.
- Open the Hex WorkShop, then do file open m2server.exe
- Press CTRL+F and search for 807834077628
- Change the hex to 807834FE7628 by overwritting the highlighted part.
- Save the new m2server and always remember to make a backup.
ta m8 btw u kno that hex thing u told me d/load were it tells u how 2 change the lot well..... wen i try lookin for some of em it comes up wiv a prob sayin it cant find it or summat 1 of em it asked me to change the [type] to 32 bit unsigned long is that a prob ??
ta m8 btw u kno that hex thing u told me d/load were it tells u how 2 change the lot well..... wen i try lookin for some of em it comes up wiv a prob sayin it cant find it or summat 1 of em it asked me to change the [type] to 32 bit unsigned long is that a prob ??
can u please pm me the hex u wish to do so that i can explain it much more better than it is in that guide?
u got msn pal ?? that is the easiest way u can explain 2 me well i think it is ne ways if u got msn leave me ur addy and ill add u thx m8
