Why Can't People Connect?
People can't connect to your server because you more than likely haven't changed the IP address's in the files. For example, 127.0.0.1 is self hosting and therefore only you will be able to connect whilst that is in the files. Most people leave it as that just to test the server.
How To I Let Other People Connect?
Here's What You Have To Do, Go To Each Of These Files And Check For '127.0.0.1'. Each Time You See '127.0.0.1' Replace It With YOUR IP Address. Hopefully doing that should work. (If you have a router etc i'm not to sure about them. This will just let people without routers etc (unless you know about them) connect.
gate_server/LoginGate/mirgate.ini
gate_server/RunGate/mirgate.ini
gate_server/SelChrGate/mirgate.ini
mir200/!setup.txt
mir200/!runaddr.txt
mir200/!servertable.txt
mud2/DBSrv200/!addrtable.txt
mud2/DBSrv200/!serverinfo.txt
mud2/DBSrv200/dbsrsc.ini
mud2/Logsrv/!addrtable.txt
mud2/Logsrv/!serveraddr.txt
mud2/Logsrv/Logsrv.ini
(Please Make A Sticky)
People can't connect to your server because you more than likely haven't changed the IP address's in the files. For example, 127.0.0.1 is self hosting and therefore only you will be able to connect whilst that is in the files. Most people leave it as that just to test the server.
How To I Let Other People Connect?
Here's What You Have To Do, Go To Each Of These Files And Check For '127.0.0.1'. Each Time You See '127.0.0.1' Replace It With YOUR IP Address. Hopefully doing that should work. (If you have a router etc i'm not to sure about them. This will just let people without routers etc (unless you know about them) connect.
gate_server/LoginGate/mirgate.ini
gate_server/RunGate/mirgate.ini
gate_server/SelChrGate/mirgate.ini
mir200/!setup.txt
mir200/!runaddr.txt
mir200/!servertable.txt
mud2/DBSrv200/!addrtable.txt
mud2/DBSrv200/!serverinfo.txt
mud2/DBSrv200/dbsrsc.ini
mud2/Logsrv/!addrtable.txt
mud2/Logsrv/!serveraddr.txt
mud2/Logsrv/Logsrv.ini
(Please Make A Sticky)
