m2server.exe
- Thread starter azzaman
- Start date
- Status
this error report is real easy 
here ya go.........
Click Here To Download UnPnP A Program Needed To Be Run If You Get An Error In M2Server.
------Updated
Remeber when u install this prgram it will be enabled u must disable it.
here ya go.........
Click Here To Download UnPnP A Program Needed To Be Run If You Get An Error In M2Server.
------Updated
Remeber when u install this prgram it will be enabled u must disable it.
$h@d0wkn1ght said:this error report is real easy
here ya go.........
Click Here To Download UnPnP A Program Needed To Be Run If You Get An Error In M2Server.
------Updated
Remeber when u install this prgram it will be enabled u must disable it.
ok i dun that now ive changed all my ip's in the folders to my ip but wen i load up the server i get fatal error! whatever else it says wen i select my character
ok could you please follow these instructions tnxs....
©2002 - TheLostOne
This contains a guide on how to setup the server files.
PLZ NOTE: This will only let the game run on the host comp
(the comp which is running the server). To let others connect
you need to set-up and ftp client which I will write in another README.
1) Extract files to C:\mirserver\
2) Go into the C:\mirserver folder then into the 'gamelog' folder, then
into 'logdatasrv' folder.
3) Open 'logdata.ini'
It'll look like this
---------------------------------------------------------------------------
[setup]
basedir=D:\korea\gamelog\LogDataSrv\Logbase\
---------------------------------------------------------------------------
change it to:
---------------------------------------------------------------------------
[setup]
basedir=C:\mirserver\gamelog\LogDataSrv\Logbase\
---------------------------------------------------------------------------
4) Go back into the C:\mirserver folder and then into the 'mud2' folder, and open
the 'DBSrv200' folder.
5) Open 'dbsrc.ini'
It'll look like this:
---------------------------------------------------------------------------
[Setup]
ServerName=ktest
Port=6000
MapFile=C:\mirserv\Mir200\Envir\MapInfo.txt
[Server]
;Login Server's private ip
IDSAddr = 127.0.0.1
IDSPort = 5600
[DB]
dir=D:\korea\mud2\DBsrv200\FDB\
IdDir=D:\korea\mud2\DBsrv200\FDB\
HumDir=D:\korea\mud2\DBsrv200\FDB\
FeeDir=D:\korea\mud2\DBsrv200\FDB\
Backup=D:\korea\mud2\DBsrv200\Backup\
connectDir=D:\korea\mud2\DBsrv200\Connection\
LogDir=D:\korea\mud2\DBsrv200\Log\
----------------------------------------------------------------------------
Change to:
----------------------------------------------------------------------------
[Setup]
ServerName=ktest
Port=6000
MapFile=C:\mirserver\Mir200\Envir\MapInfo.txt
[Server]
;Login Server's private ip
IDSAddr = 127.0.0.1
IDSPort = 5600
[DB]
dir=C:\mirserver\mud2\DBsrv200\FDB\
IdDir=C:\mirserver\mud2\DBsrv200\FDB\
HumDir=C:\mirserver\mud2\DBsrv200\FDB\
FeeDir=C:\mirserver\mud2\DBsrv200\FDB\
Backup=C:\mirserver\mud2\DBsrv200\Backup\
connectDir=C:\mirserver\mud2\DBsrv200\Connection\
LogDir=C:\mirserver\mud2\DBsrv200\Log\
-----------------------------------------------------------------------------
6) Go back into C:\mirserver\mud2\ and open the 'Logsrv' folder.
7) Open the 'Logsrv.ini' file.
It'll look like this:
------------------------------------------------------------------------------
[server]
DBServer=127.0.0.1
DBSPort=16300
FeePort=16301
LogPort=16302
ReadyServers=0
EnableMakingID=TRUE
EnableTrial=FALSE
CountLogDir=D:\korea\mud2\Logsrv\CountLog\
WebLogDir=D:\korea\Share\GameWFolder\
FeedIDList=D:\korea\Share\Feed\FeedIDList.txt
FeedIPList=D:\korea\Share\Feed\FeedIPList.txt
[DB]
IdDir='.\IDDB\'
-------------------------------------------------------------------------------
Change to:
-------------------------------------------------------------------------------
[server]
DBServer=127.0.0.1
DBSPort=16300
FeePort=16301
LogPort=16302
ReadyServers=0
EnableMakingID=TRUE
EnableTrial=FALSE
CountLogDir=C:\mirserver\mud2\Logsrv\CountLog\
WebLogDir=C:\mirserver\Share\GameWFolder\
FeedIDList=C:\mirserver\Share\Feed\FeedIDList.txt
FeedIPList=C:\mirserver\Share\Feed\FeedIPList.txt
[DB]
IdDir='.\IDDB\'
--------------------------------------------------------------------------------
8) Go back into the C:\mirserver folder and open the 'Mir200' folder.
9) Open !setup.txt
It'll look like this:
--------------------------------------------------------------------------------
[Server]
ServerIndex=0
ServerName=ktest
ServerNumber=0
VentureServer=FALSE
TestServer=TRUE
TestLevel=7
TestGold=0
TestServerUserLimit=5000
ServiceMode=FALSE
NonPKServer=FALSE
DBAddr=127.0.0.1
DBPort=6000
IDSAddr=127.0.0.1
IDSPort=5600
MsgSrvAddr=127.0.0.1
MsgSrvPort=4900
HumLimit=30
MonLimit=30
ZenLimit=30
NpcLimit=5
SocLimit=30
DecLimit=10
UserFull=500
ZenFastStep=300
SendBlock=1000
CheckBlock=8000
AvailableBlock=50
GateLoad=0
LogServerAddr=127.0.0.1
LogServerPort=10000
ViewHackMessage=TRUE
ViewAdmissionFailure=TRUE
;HalfFeeStart=2
;HalfFeeEnd=10
[Share]
BaseDir=D:\korea\Mir200\Share\
GuildDir=D:\korea\Mir200\GuildBase\Guilds\
GuildFile=D:\korea\Mir200\GuildBase\Guildlist.txt
VentureDir=D:\korea\Mir200\ShareV\
ConLogDir=D:\korea\Mir200\ConLog\
CastleDir=D:\korea\Mir200\Envir\Castle\
EnvirDir=D:\korea\Mir200\Envir\
MapDir=D:\korea\Mir200\Map\
[Setup]
ClientFile1=mir.dat
ClientFile2=
ClientFile3=
ItemNumber=1964471325
HomeMap=0
HomeX=289
HomeY=618
[Names]
ClothsMan='BaseDress(M)'
ClothsWoman='BaseDress(F)'
WoodenSword='WoodenSword'
Candle='Candle'
BasicDrug='(HP)DrugSmall'
GoldStone='GoldOre'
SilverStone='SilverOre'
SteelStone='IronOre'
CopperStone='Copp'
BlackStone='BlackOre'
Zuma1='ZumaGuardian'
Zuma2='ZumaStatue'
Zuma3='ZumaArcher'
Zuma4='WedgeMoth'
Bee='BugBat'
Spider='Larva'
WomaHorn='WoomaHorn'
ZumaPiece='ZumaRelic'
----------------------------------------------------------------------------
Change to:
----------------------------------------------------------------------------
[Server]
ServerIndex=0
ServerName=ktest
ServerNumber=0
VentureServer=FALSE
TestServer=TRUE
TestLevel=7
TestGold=0
TestServerUserLimit=5000
ServiceMode=FALSE
NonPKServer=FALSE
DBAddr=127.0.0.1
DBPort=6000
IDSAddr=127.0.0.1
IDSPort=5600
MsgSrvAddr=127.0.0.1
MsgSrvPort=4900
HumLimit=30
MonLimit=30
ZenLimit=30
NpcLimit=5
SocLimit=30
DecLimit=10
UserFull=500
ZenFastStep=300
SendBlock=1000
CheckBlock=8000
AvailableBlock=50
GateLoad=0
LogServerAddr=127.0.0.1
LogServerPort=10000
ViewHackMessage=TRUE
ViewAdmissionFailure=TRUE
;HalfFeeStart=2
;HalfFeeEnd=10
[Share]
BaseDir=C:\mirserver\Mir200\Share\
GuildDir=C:\mirserver\Mir200\GuildBase\Guilds\
GuildFile=C:\mirserver\Mir200\GuildBase\Guildlist.txt
VentureDir=C:\mirserver\Mir200\ShareV\
ConLogDir=C:\mirserver\Mir200\ConLog\
CastleDir=C:\mirserver\Mir200\Envir\Castle\
EnvirDir=C:\mirserver\Mir200\Envir\
MapDir=C:\mirserver\Mir200\Map\
[Setup]
ClientFile1=mir.dat
ClientFile2=
ClientFile3=
ItemNumber=1964471325
HomeMap=0
HomeX=289
HomeY=618
[Names]
ClothsMan='BaseDress(M)'
ClothsWoman='BaseDress(F)'
WoodenSword='WoodenSword'
Candle='Candle'
BasicDrug='(HP)DrugSmall'
GoldStone='GoldOre'
SilverStone='SilverOre'
SteelStone='IronOre'
CopperStone='Copp'
BlackStone='BlackOre'
Zuma1='ZumaGuardian'
Zuma2='ZumaStatue'
Zuma3='ZumaArcher'
Zuma4='WedgeMoth'
Bee='BugBat'
Spider='Larva'
WomaHorn='WoomaHorn'
ZumaPiece='ZumaRelic'
--------------------------------------------------------------------------
You can also change:
TestLevel=7
TestGold=0
and put your own values where '7' and '0' are, as for the level you start at, and
gold you start with.
10) Go back into C:\mirserver and open the 'client' folder.
11) Open the 'client.zip' file and extract (unzip) 'ONLY' mir.exe, ftp.ini, mir.ini and
mirsetup.ini into your C:\program files\WEMADE Entertainment\Legend of Mir folder.
Also, go to C:\mirserver then open the 'Mir200' folder and then open the 'Envir' folder
then open the adminlist.txt file.
on a line, write
*yourcharname
yourcharname= the name of the character you want to be a GM.
The * states they are a GM with full GM powers.
12) Install DBCommander 2000 Pro (if you haven't already installed it).
13) Open your control panel in Start > Settings > Control Panel.
14) Open 'BDE Administrator'. Then, click 'Object', 'New'.
15) A box will pop-up with a drop-down selection box. From that box select STANDARD, and click
OK.
16) In the left-panel you'll see a new file appear called 'standard1', rename this to HeroDB
In the right panel, it'll look like this.
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH
Change to:
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH C:\mirserver\mud2\DB
17) in the left-panel right click the HeroDB file and click 'apply'.
18) Close BDE Administrator.
19) Go to C:\mirserver and open the 'gamelog' folder, then 'logdatasrv' folder,
and run LogDataServer.exe
20) Go to C:\mirserver open the 'gate_server' folder, then open the 'LoginGate' folder then
run 'Logingate.exe'.
Go back one folder and open the 'RunGate' folder, and run 'RunGate.exe'.
Go back one folder and open the 'SelChrGate' folder, and then run 'Gate30.exe'.
21) Go back to C:\mirserver folder and open the 'mud2' folder. Then open the 'DBSrv200' folder
and run 'DBServer.exe'.
Go back one folder and open the 'Logsrv' folder. Then run 'LoginSrv.exe'.
22) Go back to C:\mirserver and open the 'Mir200' folder. Then Run M2Server.exe
23) Now open the Legend of Mir game, and it should work!!
24) Make an ID and then for your character name it to the name you put in the admin list,
previously. (do not put the * in your characters name of course)
25) Once in game type: @gamemaster and you will be a GM!
further GM commands can be found in C:\mirserver open 'Documents' folder and open
commands.txt
Naughty boy OllieD you took the commands from there ^_^ .
There we have it! they should work perfectly, also keep checking forums and ill put a guide
to let other ppl join ur server.
Guide written by: TheLostOne on http://www.mkanetwork.co.uk/~ollied/Forums/
Obtained from http://www.lalacorphq.pwp.blueyonder.co.uk/serverfilesREADME.txt
Continue...........
©2002 - TheLostOne
This contains a guide on how to setup the server files.
PLZ NOTE: This will only let the game run on the host comp
(the comp which is running the server). To let others connect
you need to set-up and ftp client which I will write in another README.
1) Extract files to C:\mirserver\
2) Go into the C:\mirserver folder then into the 'gamelog' folder, then
into 'logdatasrv' folder.
3) Open 'logdata.ini'
It'll look like this
---------------------------------------------------------------------------
[setup]
basedir=D:\korea\gamelog\LogDataSrv\Logbase\
---------------------------------------------------------------------------
change it to:
---------------------------------------------------------------------------
[setup]
basedir=C:\mirserver\gamelog\LogDataSrv\Logbase\
---------------------------------------------------------------------------
4) Go back into the C:\mirserver folder and then into the 'mud2' folder, and open
the 'DBSrv200' folder.
5) Open 'dbsrc.ini'
It'll look like this:
---------------------------------------------------------------------------
[Setup]
ServerName=ktest
Port=6000
MapFile=C:\mirserv\Mir200\Envir\MapInfo.txt
[Server]
;Login Server's private ip
IDSAddr = 127.0.0.1
IDSPort = 5600
[DB]
dir=D:\korea\mud2\DBsrv200\FDB\
IdDir=D:\korea\mud2\DBsrv200\FDB\
HumDir=D:\korea\mud2\DBsrv200\FDB\
FeeDir=D:\korea\mud2\DBsrv200\FDB\
Backup=D:\korea\mud2\DBsrv200\Backup\
connectDir=D:\korea\mud2\DBsrv200\Connection\
LogDir=D:\korea\mud2\DBsrv200\Log\
----------------------------------------------------------------------------
Change to:
----------------------------------------------------------------------------
[Setup]
ServerName=ktest
Port=6000
MapFile=C:\mirserver\Mir200\Envir\MapInfo.txt
[Server]
;Login Server's private ip
IDSAddr = 127.0.0.1
IDSPort = 5600
[DB]
dir=C:\mirserver\mud2\DBsrv200\FDB\
IdDir=C:\mirserver\mud2\DBsrv200\FDB\
HumDir=C:\mirserver\mud2\DBsrv200\FDB\
FeeDir=C:\mirserver\mud2\DBsrv200\FDB\
Backup=C:\mirserver\mud2\DBsrv200\Backup\
connectDir=C:\mirserver\mud2\DBsrv200\Connection\
LogDir=C:\mirserver\mud2\DBsrv200\Log\
-----------------------------------------------------------------------------
6) Go back into C:\mirserver\mud2\ and open the 'Logsrv' folder.
7) Open the 'Logsrv.ini' file.
It'll look like this:
------------------------------------------------------------------------------
[server]
DBServer=127.0.0.1
DBSPort=16300
FeePort=16301
LogPort=16302
ReadyServers=0
EnableMakingID=TRUE
EnableTrial=FALSE
CountLogDir=D:\korea\mud2\Logsrv\CountLog\
WebLogDir=D:\korea\Share\GameWFolder\
FeedIDList=D:\korea\Share\Feed\FeedIDList.txt
FeedIPList=D:\korea\Share\Feed\FeedIPList.txt
[DB]
IdDir='.\IDDB\'
-------------------------------------------------------------------------------
Change to:
-------------------------------------------------------------------------------
[server]
DBServer=127.0.0.1
DBSPort=16300
FeePort=16301
LogPort=16302
ReadyServers=0
EnableMakingID=TRUE
EnableTrial=FALSE
CountLogDir=C:\mirserver\mud2\Logsrv\CountLog\
WebLogDir=C:\mirserver\Share\GameWFolder\
FeedIDList=C:\mirserver\Share\Feed\FeedIDList.txt
FeedIPList=C:\mirserver\Share\Feed\FeedIPList.txt
[DB]
IdDir='.\IDDB\'
--------------------------------------------------------------------------------
8) Go back into the C:\mirserver folder and open the 'Mir200' folder.
9) Open !setup.txt
It'll look like this:
--------------------------------------------------------------------------------
[Server]
ServerIndex=0
ServerName=ktest
ServerNumber=0
VentureServer=FALSE
TestServer=TRUE
TestLevel=7
TestGold=0
TestServerUserLimit=5000
ServiceMode=FALSE
NonPKServer=FALSE
DBAddr=127.0.0.1
DBPort=6000
IDSAddr=127.0.0.1
IDSPort=5600
MsgSrvAddr=127.0.0.1
MsgSrvPort=4900
HumLimit=30
MonLimit=30
ZenLimit=30
NpcLimit=5
SocLimit=30
DecLimit=10
UserFull=500
ZenFastStep=300
SendBlock=1000
CheckBlock=8000
AvailableBlock=50
GateLoad=0
LogServerAddr=127.0.0.1
LogServerPort=10000
ViewHackMessage=TRUE
ViewAdmissionFailure=TRUE
;HalfFeeStart=2
;HalfFeeEnd=10
[Share]
BaseDir=D:\korea\Mir200\Share\
GuildDir=D:\korea\Mir200\GuildBase\Guilds\
GuildFile=D:\korea\Mir200\GuildBase\Guildlist.txt
VentureDir=D:\korea\Mir200\ShareV\
ConLogDir=D:\korea\Mir200\ConLog\
CastleDir=D:\korea\Mir200\Envir\Castle\
EnvirDir=D:\korea\Mir200\Envir\
MapDir=D:\korea\Mir200\Map\
[Setup]
ClientFile1=mir.dat
ClientFile2=
ClientFile3=
ItemNumber=1964471325
HomeMap=0
HomeX=289
HomeY=618
[Names]
ClothsMan='BaseDress(M)'
ClothsWoman='BaseDress(F)'
WoodenSword='WoodenSword'
Candle='Candle'
BasicDrug='(HP)DrugSmall'
GoldStone='GoldOre'
SilverStone='SilverOre'
SteelStone='IronOre'
CopperStone='Copp'
BlackStone='BlackOre'
Zuma1='ZumaGuardian'
Zuma2='ZumaStatue'
Zuma3='ZumaArcher'
Zuma4='WedgeMoth'
Bee='BugBat'
Spider='Larva'
WomaHorn='WoomaHorn'
ZumaPiece='ZumaRelic'
----------------------------------------------------------------------------
Change to:
----------------------------------------------------------------------------
[Server]
ServerIndex=0
ServerName=ktest
ServerNumber=0
VentureServer=FALSE
TestServer=TRUE
TestLevel=7
TestGold=0
TestServerUserLimit=5000
ServiceMode=FALSE
NonPKServer=FALSE
DBAddr=127.0.0.1
DBPort=6000
IDSAddr=127.0.0.1
IDSPort=5600
MsgSrvAddr=127.0.0.1
MsgSrvPort=4900
HumLimit=30
MonLimit=30
ZenLimit=30
NpcLimit=5
SocLimit=30
DecLimit=10
UserFull=500
ZenFastStep=300
SendBlock=1000
CheckBlock=8000
AvailableBlock=50
GateLoad=0
LogServerAddr=127.0.0.1
LogServerPort=10000
ViewHackMessage=TRUE
ViewAdmissionFailure=TRUE
;HalfFeeStart=2
;HalfFeeEnd=10
[Share]
BaseDir=C:\mirserver\Mir200\Share\
GuildDir=C:\mirserver\Mir200\GuildBase\Guilds\
GuildFile=C:\mirserver\Mir200\GuildBase\Guildlist.txt
VentureDir=C:\mirserver\Mir200\ShareV\
ConLogDir=C:\mirserver\Mir200\ConLog\
CastleDir=C:\mirserver\Mir200\Envir\Castle\
EnvirDir=C:\mirserver\Mir200\Envir\
MapDir=C:\mirserver\Mir200\Map\
[Setup]
ClientFile1=mir.dat
ClientFile2=
ClientFile3=
ItemNumber=1964471325
HomeMap=0
HomeX=289
HomeY=618
[Names]
ClothsMan='BaseDress(M)'
ClothsWoman='BaseDress(F)'
WoodenSword='WoodenSword'
Candle='Candle'
BasicDrug='(HP)DrugSmall'
GoldStone='GoldOre'
SilverStone='SilverOre'
SteelStone='IronOre'
CopperStone='Copp'
BlackStone='BlackOre'
Zuma1='ZumaGuardian'
Zuma2='ZumaStatue'
Zuma3='ZumaArcher'
Zuma4='WedgeMoth'
Bee='BugBat'
Spider='Larva'
WomaHorn='WoomaHorn'
ZumaPiece='ZumaRelic'
--------------------------------------------------------------------------
You can also change:
TestLevel=7
TestGold=0
and put your own values where '7' and '0' are, as for the level you start at, and
gold you start with.
10) Go back into C:\mirserver and open the 'client' folder.
11) Open the 'client.zip' file and extract (unzip) 'ONLY' mir.exe, ftp.ini, mir.ini and
mirsetup.ini into your C:\program files\WEMADE Entertainment\Legend of Mir folder.
Also, go to C:\mirserver then open the 'Mir200' folder and then open the 'Envir' folder
then open the adminlist.txt file.
on a line, write
*yourcharname
yourcharname= the name of the character you want to be a GM.
The * states they are a GM with full GM powers.
12) Install DBCommander 2000 Pro (if you haven't already installed it).
13) Open your control panel in Start > Settings > Control Panel.
14) Open 'BDE Administrator'. Then, click 'Object', 'New'.
15) A box will pop-up with a drop-down selection box. From that box select STANDARD, and click
OK.
16) In the left-panel you'll see a new file appear called 'standard1', rename this to HeroDB
In the right panel, it'll look like this.
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH
Change to:
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH C:\mirserver\mud2\DB
17) in the left-panel right click the HeroDB file and click 'apply'.
18) Close BDE Administrator.
19) Go to C:\mirserver and open the 'gamelog' folder, then 'logdatasrv' folder,
and run LogDataServer.exe
20) Go to C:\mirserver open the 'gate_server' folder, then open the 'LoginGate' folder then
run 'Logingate.exe'.
Go back one folder and open the 'RunGate' folder, and run 'RunGate.exe'.
Go back one folder and open the 'SelChrGate' folder, and then run 'Gate30.exe'.
21) Go back to C:\mirserver folder and open the 'mud2' folder. Then open the 'DBSrv200' folder
and run 'DBServer.exe'.
Go back one folder and open the 'Logsrv' folder. Then run 'LoginSrv.exe'.
22) Go back to C:\mirserver and open the 'Mir200' folder. Then Run M2Server.exe
23) Now open the Legend of Mir game, and it should work!!
24) Make an ID and then for your character name it to the name you put in the admin list,
previously. (do not put the * in your characters name of course)
25) Once in game type: @gamemaster and you will be a GM!
further GM commands can be found in C:\mirserver open 'Documents' folder and open
commands.txt
Naughty boy OllieD you took the commands from there ^_^ .
There we have it! they should work perfectly, also keep checking forums and ill put a guide
to let other ppl join ur server.
Guide written by: TheLostOne on http://www.mkanetwork.co.uk/~ollied/Forums/
Obtained from http://www.lalacorphq.pwp.blueyonder.co.uk/serverfilesREADME.txt
Continue...........
once you have followed the above....install the unpnp or run it, then it will say "Unpnp is currently enabled" click on Disable. then your M2Server will work......
And your ips..... here is a program that will sort that out for you
Click Here To Download Server Starter. A Program That Helps Start Your Server By Changing Ips.
And your ips..... here is a program that will sort that out for you
Click Here To Download Server Starter. A Program That Helps Start Your Server By Changing Ips.
umm... keep trying..... also make sure you rly don't change anything around in the configs if you change your server name from ktest to yourname you must make sure all the KTEST is changed to "yourname" the server can't have "Your name" think its "your_name" or "Yourname". Use the serverstarter to change the necessary ips...
- Status