[2.3] Problem making 2 shinsu/skele spawn

[marcmulhern3]

I've been searching the forums trying to find a solution for this for about 3hours >_<

Ive edited my setup.txt so it reads:

SkeletonCount=2
SkeletonHumLevel0=0
SkeletonCount0=2
SkeletonLevel0=0
SkeletonHumLevel1=0
SkeletonCount1=2
SkeletonLevel1=0
SkeletonHumLevel2=0
SkeletonCount2=0
SkeletonLevel2=0
SkeletonHumLevel3=0
SkeletonCount3=0
SkeletonLevel3=0
SkeletonHumLevel4=0
SkeletonCount4=0
SkeletonLevel4=0
SkeletonHumLevel5=0
SkeletonCount5=0
SkeletonLevel5=0
SkeletonHumLevel6=0
SkeletonCount6=0
SkeletonLevel6=0
SkeletonHumLevel7=0
SkeletonCount7=0
SkeletonLevel7=0
SkeletonHumLevel8=0
SkeletonCount8=0
SkeletonLevel8=0
SkeletonHumLevel9=0
SkeletonCount9=0
SkeletonLevel9=0

I also tried updating this from the M2 server under options > Funcutions but it still wont let me summon 2 shinsus/skeles.

I was reading sumthing about hexing but all these posts were dated 2004 so im presuming i woudnt need to do that?

I am running a Diamond 2.3 Server. Is there something silly im missing here?

---------- Post added 15-09-2011 at 01:35 PM ---------- Previous post was 14-09-2011 at 11:16 PM ----------

Each time i try to summon a 2nd pet it just makes the 1st 1 summon behind me :/ Any1 have any ideas?