Ok this is how to Route your SpeedTouch Router to Host Your Server:
Open up Internet Explorer and paste this into the Address Bar http://10.0.0.138
This Web Page Should come up:
Then Click the Advanced Drop down menu it should now look like this:
Then Click NAPT on the Menu and it should look like this:
Click the little triangle by the 1 in the box and this should come up:
On that screen see where i have 5000 you need to change whatever you have in there to 5000 in both of the boxes
then press aply at the bottom and Click Save All up in the left hand corner.
If by the Triangle and the 1 you have the same underneith but with a 2 instead of the one then all you need to do is do the same as you did for the 1 in there but itl probably dissapear after youve done it anyways
I hope this helps you but im not a 100% sure if this works
Open up Internet Explorer and paste this into the Address Bar http://10.0.0.138
This Web Page Should come up:
Then Click the Advanced Drop down menu it should now look like this:
Then Click NAPT on the Menu and it should look like this:
Click the little triangle by the 1 in the box and this should come up:
On that screen see where i have 5000 you need to change whatever you have in there to 5000 in both of the boxes
then press aply at the bottom and Click Save All up in the left hand corner. If by the Triangle and the 1 you have the same underneith but with a 2 instead of the one then all you need to do is do the same as you did for the 1 in there but itl probably dissapear after youve done it anyways
I hope this helps you but im not a 100% sure if this works